The Oppo PM-3 A Competent Comfortable Mobile Headphone

Third in a series of planar magnetic headphone releases from Oppo Digital, and at $399 their lowest cost entrant to date, the PM-3 is intended as a planar magnetic headphone for portable use...and it delivers.

The PM-3 is a full-size, circumaural (around the ear), sealed headphone. The planar magnetic driver in the PM-3 is very similar to that of the PM-1/2. The primary difference is that the driver diaphragm in the PM-1/2 is oval and is slightly smaller and circular in the PM-3. Other than that, the driver is virtually identical. I won't talk about the driver itself here in this review as I've already written a pretty comprehensive description of it in my PM-1 review. General information about these devices can be read in my article "How Planar Magnetic Headphone Drivers Work."

Oppo_PM3_Photo_ColorsThe styling of the PM-3 is masculine, conservative, and sumptuous. The mix of metals, high-quality protein leather, and plastics is appropriate for a headphone at this price. The PM-3 is currently available in black and white color schemes, but Oppo was showing some blue and red prototypes at AXPONA 2015.

Planar magnetic (PM) headphones are often quite heavy due to all the magnets in the driver. The PM-3 is extraordinarily light for a headphone of this type weighing in at 323 grams. For comparison with other PM headphones: PM-1 390gr; EL-8 488gr; HE-500 492gr; and LCD-3 613gr. On the other hand, the PM-3 remains a bit heavier than dynamic sealed headphones in this category: NAD VISO HP50 256 gr; Focal Spirit Professional 282gr; Audio Technica ATH-MSR7 285gr; and Shure SRH1540 290gr.

Even though its very light for a planar magnetic, it remains a slightly heavy headphone for portable use and as such needs ample padding on headband and ears...which it indeed has. The headband is fully wrapped with protein leather and covers foam all the way around, with thicker foam on the inside of the band.

Even though the outside ear pad dimensions are smaller than the PM-1/2 (98mmx77mm vs. 103mmx80mm), the inside opening on the PM-3 is actually larger than the PM-1/2 (57mmx40mm vs. 57mmx35mm). I'd say that's about an average size openings for a circumaural headphone. I found them comfortable for long listening sessions, though just a tad too cozy and warm feeling due to the weight and needing to hug the head sufficiently for them to remain stable on the head. They're quite comfortable, but they don't disappear on your head like some lighter weight cans can.

Ear cups rotate 180 degrees to rotate flat in either direction. Arms to either side slide in and out of the headband to adjust for fit. The detented adjustment is appropriately easy to move, yet remains securely in place when set. I found the overall mechanical performance of these headphones excellent with no sign of a rattle or squeak at all.

Oppo_PM3_Photo_pad

Oppo's PM-3 manual states that the pads are not to be removed by the end user. However, they are not permanently attached; with a very strong pull with fingernails prying apart the pad from the ear capsule, the pad does un-clip from the headphones. Do not pull from the pad itself. It takes way too much force and I worry about the pad material tearing. Putting the pad back on is a bit clumsy as well. The problem is that it's not designed to be done by the end user and getting a feel for where to place the pad to get the six clips to line up is not easy. If you need pads replace, the headphones should be sent to Oppo for repairs. If you're a die-hard DIYer who doesn't care bout your warranty and just has to get under the hood...I get it, have fun, but be careful. I'll also note for DIYers that under the ear pad is a foam pad over the driver, which is adhered to the surface of the baffle plate covering the baffle plate screws. This foam pad will have to be damaged to get to the screws underneath for further disassembly. Lastly, as you'll see on the next page, these sound very good already and I'd bet 9 out of 10 times a hobbyist modification would make them sound worse not better—I just don't see these cans as much of a candidate for modding.

Included accessories are quite nicely selected. A selvage denim hard-side, clam-shell case will contain the PM-3 when folded flat with cable removed. (Photo on next page.) It has a small padded tab located between the ear cups so they don't bump and grind during transport. Two cables are included: a 3 meter long straight cable; and your choice of a 1.2 meter cable with remote for iOS, Android, or none at all.

Isolation is quite good for a passively isolating sealed headphone. These will work in fairly noisy environments. And unlike many planar magnetic headphones, the PM-3 is quite efficient and can be driven to satisfying levels from portable devices.

All-in-all, I find the build quality, comfort, and styling well above average in its class, mainly in that it does such a great job covering all the bases. Real leather and 50 grams less would have put it right at the top...but I'm not sure real leather is actually more comfortable and cooler on the skin than high-quality protein leather. (Have to look into that one of these days.) The big question is how do they sound?

Turn the page and we'll have a listen.

COMPANY INFO
Oppo Digital
2629 Terminal Blvd., Ste B
Mountain View, CA 94043
(650) 961-1118
ARTICLE CONTENTS

COMMENTS
Claritas's picture

The pads are listed as 60 mm, but they're actually 57 mm! Whereas the average guy's ear in America is 65.9 mm. Their being average size for the industry doesn't change that. The bottom line: this isn't going to be circumaural for *most* people. It's a failure of design, plain and simple.

zobel's picture

These are dead in the water for me for that reason.

Tyll Hertsens's picture
Thanks for your comment. Your numbers look legit. I'm going to have to think about this for a while to know where I come down on it. These cans felt cozy, but not confining to me at all. I don't know that I'd call it a failure of design, there may be mitigating factors---maybe when the pads get bigger they also get less stable on the head, the ears may register the headphone better in place and actually feel more comfortable. Dunno, just saying that I wouldn't be too quick to judge. My ears are 66mm, so about average. The FSP and original Momentum were problematic, though. Anyway, thanks for the poke, I'll keep it in mind.
zobel's picture

They wouldn't work for me. What size ears do they fit?

Tyll Hertsens's picture
Mine are 66mm and they seem fine. So mine are boggier than the opening, yet it doesn't feel that way. Like I say, I'm gonna have to think about this a bit and ask some people some questions. Don't have any good answers right now.
zobel's picture

What size ears will these fit around?

JE's picture

Indeed it is a failure of design. Manufacturers need to understand that these pseudocircumaural designs are not doing any good. If you need portable, go for portable offerings. Circumaural headphones should guarantee big enough pads/cups for the best comfort AND sound quality.

I have discussed this numerous times in recent months on our website (headaudio.weebly.com) or discussion boards because I am really sensitive to pad sizing... It is a much more important topic than people seem to realise. In order to achieve a proper seal and comfort, you not only need large enough diameter but also enough DEPTH. The smaller the pads, the more your pinna or the surrounding area is 'interfering' and ruining the proper seal. Manufacturers then sometimes try to compensate for this using increased clamping force which is something I distaste as well. I sometimes wonder if they are trying to invent a new category of headphones: half on-ear, half over-ear.

I would be somewhat more willingful to accept a bit smaller earpads with dynamic offerings where the sweetspot radius is not ideal (due to the driver's nature => you have to take care about how to position the headphones properly on your head to get the ideal FR) but we are talking orthodynamic here. Look at the Hifiman headphones - extremely consistent despite different positioning. Why? Because they designed the section between driver and your ears properly. No need for smallish earpads with properly designed orthodynamic headphones.

halcyon's picture

Oppo would have easily gotten couple times more sales, had they made the pads user changeable and/or included even slightly bigger/deeper pads to begin with.

Yes, headphone design if full of compromises and so are sales!

TMRaven's picture

When beta testing the headphones, I found that the initial PM3 had very good if not the best vocal performance I've ever seen in a headphone, vocals just seemed so realistic and well imaged. The second version was a tad too forward in the upper midrange, causing it to lose some of that magic, so we settled on something that was a mix of the two. The end result was a headphone that still held the vocal magic of the very first beta PM3, but with some extra liveliness in the upper midrange and treble to 'lift' it off the ground.

The vocal performance just seems to be an inherent strength to the PM3 and its driver/enclosure, even if you tweak its sound somewhat. The ear openings are too small for me to be considered fully circumaural, but the pads are good enough for decent comfort for 30-345 minutes. I'm glad that Oppo and us Beta testers could work together to get a very good end result.

TMRaven's picture

I also prefer the PM3 to the PM1 as well.

money4me247's picture

I've posted a head-fi review on the PM-3 and I agree with the majority of impressions made here. I've always found Tyll's reviews to be pretty spot on if you take into account his personal sound signature preferences. I greatly enjoy the PM-3 and highly recommend people to try them. I also prefer the PM-3 over the PM-1 like TMRaven and Tyll.

I also personally found the PM-3 to also be very representative of neutral to my ears. I thought there was a subtle emphasis on sub-bass over other neutral-oriented dynamic headphones and some slight smoothing of the upper treble. I agree the vocals are a strong suit for the PM-3s with a very organic presentation of the midrange.

re: on the earpads, I've found the PM-3 earpads to actually be more comfortable than the PM-1/PM-2 earpads whose hard surface of drivers lightly brush against my ears. the foam disk that the PM-3 has above their driver really helps. I am one who has a lot of issues with earpad size, but the PM-3 was surprisingly comfortable for me without any issues.

ps: my review is found here for those interested (http://www.head-fi.org/products/oppo-pm-3/reviews/12713)

jcheadphone's picture

I had a chance to listen to the PM-3s at Axpona 2015 and I really liked them for their $399 price point. Of the new headphones I tried at Axpona I liked the PM-3s and Dan Clark's (aka Mr. Speakers) Either the best. Didn't get enough time with the HE1000 to form an strong opinion. I thought the PM-3a offered a better price to performance ratio that the new EL-8 and I own the XCs so I generally like Audeze products.

kman1211's picture

This headphone has been on my must listen list for some time. I can't wait to get a chance to hear it. I am curious how it stacks up against the DT 150 in terms of fidelity and scalability. Having similar levels of sound quality and what seems better neutrality in a more appealing and more portable package will be nice.

Hjelmevold's picture

Judging by the measurements, it should be really interesting to have someone compare the Oppo PM3 to the Soundmagic HP100/150.

The PM3 seems to be more practical due to its size and foldability, it has less harmonic distortion, cleaner impulse response, and more even bass response. On the other hand, the HP100/150 is cheaper (but with some issues with headphone cups breaking off), and has better isolation than the PM3. The frequency responses look fairly similar to me, with the HP100/150 being perhaps a bit more energetic around 10k.

Nomad_Soul's picture

Thanks for the great review, Tyll. How would you compare the comfort of the PM-3 vs the Shure SRH1540?

Tyll Hertsens's picture
The Shure SRH1540 is an amazingly comfortable headphone. More comfortable than the PM-3 and just about everything else in the category.
Long time listener's picture

"This 4-8kHz region can be really horrible sounding if over-accentuated—think piercing sibilance that makes you wince."

That's because THAT is the presence region--actually, it's defined by John Atkinson of Stereophile as roughly 2kHz to 5kHz, but close enough--and it's known as the presence region because that's where our ears can be most sensitive. Hence the piercing sounds if over-accentuated.

The following, I believe, refers to the midrange--and while the midrange has plenty of presence, it's not what is meant by "the presence region":

"I wouldn't characterize this as a big problem in the PM-3 because it means they're not strident—even though their presence region (say 800-3kHz) is a bit forward."

Cheers

Tyll Hertsens's picture
Not sure where you got that idea. From this Stereophile page:

"presence range The lower-treble part of the audio spectrum, approximately 1-3kHz, which contributes to presence in reproduced sound."

Seth195208's picture

..the experts always say "Don't be swayed by the exciting sounding ones, because what sounds exciting for five minutes in the show room sounds irritating and fatiguing for more than five minutes at home" The same thing goes for headphones. The difference between "long term exciting" and "short term exciting" is a very fine line. After listening to these headphones for a couple months now, I can say with confidence that Oppo nailed it!

Tyll Hertsens's picture
Wish I had a "like" button for posts. Yours would get one, you're exactly correct, IMO.
MLegend's picture

So wait.....since there are 3 different frequency response graphs which one represents the final version of the PM-3 available to consumers today?

Tyll Hertsens's picture
Sample B and C. The first one was early production. Samples B and C are quite close.
emelius's picture

Any comments on where the wired version of the Sennheiser Momentum 2.0 Over Ear might fit into the mix?...Forthcoming?...

Tyll Hertsens's picture
Requested numerous times, they just aren't available yet for reviewers. (I think they're pushing the wireless versions ATM.
potterpastor's picture

I'll send you my Sennheiser Momentum 2.0 for two months if you let me use your HD 700 for two months.

Tyll Hertsens's picture
I don't have an HD 700 here.
subguy812's picture

Sennheiser created confusion by releasing a wireless and a wired version so close to each other. Many folks think if they listen to the M2 wireless in passive mode it is the same headphone as teh wired only version...two different worlds. M2 wired is a much better sound signature.

ADU's picture

But what's up with the treble on this puppy?

http://cdn.innerfidelity.com/images/Oppo_PM3_Graph_PM3HarmanCompensation...

It looks like there's a modest rise in volume between 10Hz and 4kHz. But the average dBs appear to take a nose-dive above 4kHz.

I'm looking at the two compensated curves on the top of graph btw.

ELPCU's picture

And you are right about above 4khz IMO.

I won't say there is modest volume rise from 10hz to 4Khz, because frequency below 20hz is virtually not audible. You should look after 20hz, and these slight volume difference from 20~40hz is very very hard to distinguish. And I can still say the bass of this PM-3 is extended extremely well. Yes, extremely.

Considering these information, you will say it is about flat from 30hz to 2khz. and very slight emphasis from 2khz to 4khz.

And from 4khz, it drops. I consider -5dB line on graph is about reference line of this graph. And it drops like 7~8dB.

There is definitely noticeable treble drop in this can. I notice this right away when I started to compare my Sennheiser HD 600 / hidition NT-6. Though it is not terrbie by any mean. Good thing is that around 6khz is frequency range that makes treble harsh. It is range of sibilant sound. having a drop on this region make this PM-3 more relaxing, and much more comfortable sound.

At the same time, you can clearly argue this is a bad thing, and I believe it is the bad part of this can. Probably the biggest complain of mine.

Though I just cannot complain too much, because 7~8dB trench through small region is not a worst thing, and having trench right on sibliant region has some pros; And PM-3 offers everything including overall design, quality & finish, isolation, comfort, uniqueness(hey, the only outdoor planar magnetic), price, and sound quality except that treble portion.

I just cannot complain too much. Overall, I agree with Tyll. Your point is right. It is definitely worth of mention, and it is arguably cons, but it is not too bad.

All I can say is if your are treble geek or treble enthusiast, then you have to think twice before purchasing this can.

ADU's picture

It helps to get some confirmation from another user on this question.

There are some fairly prominent spikes in the 9-10kHz treble range on the Oppo PM-1 and PM-2...

http://www.innerfidelity.com/images/OppoPM1.pdf
http://www.innerfidelity.com/images/OppoPM22014StockPads.pdf

...so maybe that's one reason the treble was dialed back a bit more on this newer PM-3 model? If that's the case, perhaps they overcompensated a little too much.

I was also wondering though if some of Tyll's tweaks to the Harman curve could be slightly exaggerating the falloff above 4kHz in the corrected curves on this PM-3 plot...

http://cdn.innerfidelity.com/images/Oppo_PM3_Graph_PM3HarmanCompensation...

Or does the downward tilt between 4kHz and 20kHz on the upper curves seem about right in people's experience with this headphone?

FWIW, the NAD VISO HP50 still looks a bit flatter to me on its Harman plot (though it has a slightly darker overall tilt than the PM-3, and isn't planar-magnetic)...

http://cdn.innerfidelity.com/images/140321_Blog_HarmanResponseFR_NADVISO...

Since these seem to be two of the top contenders in the "flatness wars", did you give the NAD any consideration before getting the Oppo PM-3?

Also, how different is the sound quality on the PM-3 vs. a regular headphone? And which do you like better?

Appreciate any further thoughts you or others may wish to share on this subject.

ELPCU's picture

Well, I think spike on 9~10khz is mainly due to innerfidelity's own compensation curve. Maybe it is OPPO's PM series sound signature of having slight peak, but it seems 9~10khz peak is very common for many innerfidelity data.

Back to PM-3 graph, note peak and trenches start to appear after mid range. usually it became more intense from treble.

Since innerfidelity do not apply any smoothing option at this point, you can assume the sharp peaks are not too bad. At the same time, PM-3 lacks ultra-high as well. I am not saying PM-3 is unable to generate ultra high, because I heard 19khz sound when I performed ultra high frequency test, but it makes me to increase volume more than my other cans(HD600, B&W P7).

I personally nver heard NAD VISO HP50, but I think planar magnetic unit or PM-3's own sound signature makes some differences from normal dynamic headphone. Though, I do not want to say it is better because it is planar magnetic.

Below from here is completely my personal experience, but after I read several PM-3 reviews, it seems impressions are surprisingly similar. They are not same, but I see very similar nuance in the review.

The unique sound signature of PM-3 is..... relaxing. If I put it in bad way, it is boring. It does not give any "WOW" impression when I first pick up my can. But it is not bad by any mean.

When I compared PM-3 to P7, which has a bit more bass, but except that, pretty similar sound signature, P7 is headphone that give "WOW" impression. Not just because it has some more bass. Its treble also impress me a lot. A lot of detail is there. Wierdly enough, P7 has also slightly suppressed treble just like PM-3. But P7 impressed me hard. I feel I heard every instrument of song very vividly, especially treble.

On the other hand, after using P7 for a while, I start loose my concentration, and when I lost my concentration, P7 became just plain. There is no WOW left.

PM-3 is just opposite of that. When I first hear it, it does not impress me by any mean. So I do not concentrate at listening at first. But the sound of PM-3 is very relaxing, no fatigue. And it is so relaxing. I start to like it more. And this makes me concentrate back. From here on, I starts to hear very well extended ultra-low sound, and I also found mid is very punchy. After that, I hear all the detail back from zero. More and more I hear PM-3, I starts to like it.

I do not know this 'relaxing sound' aspect is common aspect of planar magnetic headphone, but PM-3 sounds very relaxing, which makes me think this is very natural sound. And this is probably reason why Tyll say this PM-3 is one of the most neutral headphone. It is fairly neutral in graph already, but graph-wise, I think HP50 is flatter. due to lack of treble. and I can definitely feel lack of treble when I directly compare PM-3 to other cans. However, it just sounds very natural when I just hear PM-3 alone casually.

I won't say PM-3 will be better pick, but I think PM-3 is definitely worth of hear especially for an extended time period of listening.

ADU's picture

And you seem to have excellent taste in headphones.

Based on the graphs, the B&W P7 looks a little beefier in the mid-bass and upper treble than the Oppo PM-3...

http://www.innerfidelity.com/images/BowersWilkinsP7.pdf

And the peak at 3kHz isn't quite as well-defined. But it also looks like a pretty good match to the Harman curve. I'd like to see a compensated Harman plot of this model as well.

The midrange on the B&W P7 also looks very similar to, and possibly somewhat smoother than the Oppo PM-3.

markanini's picture

Focal Spirit Pro is even flatter, in the bass range at al teast: http://cdn.innerfidelity.com/images/140321_Blog_HarmanResponseFR_FocalSp...

ADU's picture

...in the 100-300Hz range. But the NAD still looks flatter to me overall, due to less chop in the treble.

http://cdn.innerfidelity.com/images/140321_Blog_HarmanResponseFR_NADVISO...

FWIW, the PSB M4U 1 and Koss SP330 also seem like they'd plot pretty close to the Harman curve, but with a few more bumps and valleys (esp. in the treble) than the NAD.

ADU's picture

The Akai MPC also looks like a pretty good match, though it has a fairly sizable notch between 3.5 & 9kHz, some ringing in the Impulse & 300Hz tests, and needs a good seal for correct bass response, based on the raw FR samples...

http://www.innerfidelity.com/images/AkaiMPC.pdf

Some graphs of M4U 1 & SP330 for comparison...

http://www.innerfidelity.com/images/PSBM4U1.pdf
http://www.innerfidelity.com/images/KossSP330.pdf

Sub-bass looks a little out of balance on the Koss's left and right channels (with too much on left).

Seth195208's picture

out of curiosity, did you level match the NAD's with the Oppo's? Going back and forth while listening to cymbals, the more efficient phones will naturally sound louder and more exciting.

Tyll Hertsens's picture
To the best of my ability, yes.
Long time listener's picture

Tyll, I got it from John Atkinson's definitions of the presence range, occurring in many places in Stereophile over the years. He doesn't always verbally define it, but the times I've seen him do so, it begins at about 2,000: One example is here: 'The WITT's 2–8kHz "presence" range is mildly depressed relative to the midrange.' Another is his reference to the presence region in the Revel F30 speaker's frequency response, showing a graph with a dip between 2kHz and 4kHz. Another: "The HF contour can be seen to boost or depress the speaker's output over an octave or so in the presence region, centered on 4.5kHz,..." I don't recall it ever going as low as you define it, and it just always seems to me that your definition is just a little too broad, and therefore not as meaningful as the narrower definition.

But...you're the expert. I'm just a guy who read Stereophile for several decades.

zobel's picture

Holt and Atkinson are not in agreement here. Atkinson is probably more correct looking at established norms such as this.

http://en.wikipedia.org/wiki/Audio_frequency

It does make sense, as you said, that those frequencies are where the ear/brain is most sensitive, and most aware of excesses.

Seth195208's picture

This is the Audio Glossary from stereophile. Everyone should read it at least once. It will much better allow one to describe exactly what they are hearing, including the "presence range".
http://www.stereophile.com/content/sounds-audio-glossary-glossary

Neo Zuko's picture

Just recently sold my Sony MDR-1A for the Momentum 2.0 Wired Ivory. I've tried a few others like the MSR7 (gave me the worst treble headache ever) and M50X (very nice but needs more resolution and upper end smoothness) and found that the MDR-1A made me the most happy so far. However the MDR-1A's build quality let me down with creaks and the bass was a bit too loose in the end.

The Momentum 2.0 fixes the build quality issues I had with the MDR-1A, tightens up the bass, sounds great overall, is just as comfortable, but the upper half of the sound isn't quite as exciting as the MDR-1A - if by only the smallest of amounts. However as a portable headphone overall the Momentum 2.0 is excellent, especially considering build quality longevity vs the MDR-1A. Real Leather and a nicer iOS remote seals the deal.

However I was wondering if it was worth trying the Oppo PM3 next or start saving for the Noble K10 Wizard Edition that I really want. I would be very interested in hearing Tyler comment more on the Oppo PM3 vs Momentum 2.0. CNET mentioned that the PM3 isn't very forgiving vs something like the Momentum 2.0, something which gives me pause. All the headphones I've liked so far are forgiving. The MSR7 for example rapidly turned me off using just my iPhone as a source. That said the Oppo PM3 has a lot of hype around it.

Neo Zuko's picture

After watching the video I decided that the K10 is next.

meringo's picture

I didn't love the Momentum. I bought them blindly to be my portable, and was never impressed during my month of ownership. Everything was just weak to me. Vocals seemed distant, the bass was reckless, and the highs didn't sparkle in the way people described (although I'm a big Grado fan, so take my opinion of the highs with a grain of salt.) BOTH the NADs (which I ended up with) and the Oppo PM3 would be better options - by a lot. They have an incredibly similar sound. For me, it came down to value. $250 new for the NADs, with a huge jump in SQ over the momentum, and $150 less than the Oppo. ALSO extra points for coming from Canada.

Neo Zuko's picture

There must be a law that says if I post I'll do this I have to do the opposite in the end. Just ordered up the PM-3 + HA-2. Thanks inner fidelity, your reviews as always was a big factor. I needed a DAC Amp to progress and these two seem to bundle nicely together.

gertost's picture

Hi!

How do you think this headphone is against audio technica msr7? I now own the audio technica msr7,and shure se846.Sorry for bad english,i live in norway.I want the best sounding headphone for portable use (with fiio e07k andnes,and sony xperia z3).I think the msr7 sounds great,but are a little to bright.So i get a little tired in my ears.And they are warm and pressure a lot on my head.I like headphones best,but have iems i use in loud enviroment (i think iems have better noise cancelation).The shure se846 is an great allrounder.And im looking for an headphone that also is an great all rounder.I like warm,smooth sound,and that where u can hear all the details.Im not an expert audiphile,but i like audiophile sound ;) Have bought some high rez albums on hd tracks,and are using wimp hifi (tidal).Before i have ovned sennheiser momentum,denon ah-a100,and yes,one time i ovned the hd800.But open headphones are not for me.Having kid in house,its absolutly impossible to use.Lol.And for the price,i thouht it was to bad having it in the box,99% of the time.So i sold it.

The oppo pm3 looks interesting.Little high price,but if the sound delivers,i might buy one set.I listen to all kind of music.Rock,pop,electronica,classical,folk,blues,ect.I want to find the best possible headphone for me.I dont have the chance to test so many headphones,and now i want to buy one,i will have for many years to come :) and the oppo pm3 might be just that one :)

The oppo pm3

Johan B's picture

The OPPO and NAD show near enough the same frequency response, impedance, disortion. The other responses are near enough as well. Are these phones using the same drivers? Sound may differ due the different construction?

effsandoval@gmail.com's picture

Great review on the Oppo PM3. I am awaiting the arrival of my PM3. I was wondering if I could buy a cable like the QED Profile J2J for it. Would it be able to fit the socket on the side of the headphone since it has a stepped jack? =) TIA

apichetk's picture

Hi Tyll - thank you very much for your review. Truly appreciate your work. I'd like to hear your opinion if you were to rank PM-3 / 1540 and Viso HD50 in terms of sound quality and sound + portability? I currently have Final Audio Pandora Hope VI and ifi micro IDSD (dac/amp). I will likely play music from LG G4 when I travel.

Thanks Tyll!

apichetk's picture

Hi Tyll - does the order of sealed headphones on your Wall of Fame only imply pricing difference from high to low or does it imply also the ranking in terms of the overall sound quality? Thanks!

zubkabera's picture

Here in singapore I am not able to find a place where I can compare Oppo Pm-3 with Audeze El-8 or Shure 1540, between the 3 which is ranked one, acccording Type Shure is better but than he says only at low volumes, he says Oppo are best but boring and have not seen any review of EL-8 Closed back, I got the opportunity to hear EL-8 Treble is crisp and sharp but not too bright and bass has good texture and punch but not boomy, I wish Oppo which are more portable can match the Treble energy and bass of Audeze EL-8, So please help me with my quest for best. Thanks

Mauro's picture

Hi Tyll,

how can we understand from measurements if a headphone has better resolving power than another?

I am a happy owner of a pair of NAD HP50 and I really appreciate their resolving power, it is much better than my Wharfedale diamond speakers and probably of any speakers I could ever afford...

Resolving power is to me a very significant measure of audio quality!

Panurus's picture

Thank you for this site.

Have you any informations about the wireworld cables for headphones?
http://nicollpr.com/wireworld/releases/2015/WW_HeadphoneCP_FinalPR.pdf

sunnydaler's picture

I found out that the 6khz dip can be removed by shifting pm-3 a bit forward on the head. I tested with tone generator and some songs.
I guess aligning the "mandarin" opening to the center of ear canal opening is critical.

ScaryFatKidGT's picture

Gosh so these, B&W P7 Momentum's or HP50's... how do you decide? You give these nothing but praise but then say the others are more resolving..... I wish I could buy all of them :/

Sonnie Parker's picture

I agree about the size... manufacturers need to make these headphones to fit over and clear the normal ear size. I would love to own a pair of the PM-3's, but they are too small and going to be uncomfortable over wearing them for longer than a few minutes. I have just been trying out several pairs of headphones, which I wrote up over at www.avnirvana.com and the biggest issue I have is finding a set that will fit over my ears comfortably. No doubt OPPO would sell a lot more if they would make the pads larger, or interchangeable for larger pads.

Realjames9's picture

Useful article i will bookmark your site
http://www.tennis2016live.com/

JJT's picture

Hi. I plan to buy these cans, but I´m worried about the possibility of not getting an optimal marriage with my studio interface (Apogee Symphony I/O, first generation), because of their impedances: PM-3 is 26 Ohm and the headphone amp on the Symphony is 30 Ohm. I´m concerned not about "loudness”, but frecuency response, because of something I read:

"If the output impedance is greater than an 1/8th of the headphone impedance, there will be undesirable variations in frecuency response: weaker bass, glaring mid-range emphasis, muted high frecuencies, odd phase characteristics. The greater the output impedance, the more likely there will be a discrepancy in the way your headphones receive the sound. This can manifest erratically depending on the headphone. Basically they will not sound as they are meant to”. Is this… true? Does it apply to the PM-3?

According to this, when using the PM-3, the output impedance of the amp should NOT be greater than 3.25 ohm (26/8 = 3.25). But the headphone amp on my interface is 30 ohm. Will this compromise the performance of the PM-3? I think they´ll work well with my Astell & Kern portable player (2 ohm), but I´m choosing the PM-3 because of their neutral reference quality, and if they lose accuracy when paired with my interface, I feel like making a bad purchase decision, as I want to upgrade my headphones mainly for studio work (checking mixes & masters), personal entertainment is just a (very) exciting bonus…

Any assistance will be greatly appreciated.

Pop Zeus's picture

Hey just wanted to say that I really appreciate the measurements section of the review. Actually I prefer to read the written part (or watch the video) when considering a purchase. But in the case of the Oppo PM-3, when I pair it with my DAP, I get to EQ up the roll-off at the bottom and top of the range to my tastes and I get to reduce that m-shaped bump from 100-300hz, which helps smooth out the transition from bass to mids. It’s a subtle tweak but it really helps open up the sound. Apparently one of the other benefits to being a PM-3 owner is you can run them balanced and they take to EQ well.

X